Tubular heating elements

Thermostat and manually resettable thermal cut-offs

The tubular heating elements with dia. 8.5 mm can be equipped with a thermostat and a resettable thermal cut-off, mounted at the end of electrical tubular heating element. Heating elements with mounted thermal cut-off and/or thermostat are approved by SEMKO, VDE and UL, particularly suitable for liquid heating.

To determine the breaking temperature of the resettable cut-off it is advisable to measure the temperature under normal conditions and in intended application. The breaking temperature is recommended to be at least 25-30°C above the maximum temperature of the thermal cut-off at normal operation.

Technical data

	Thermostat	Thermal cut-off
Type of design	BTS 085 060 (10) 130	BTC 085 060 (10) 130
Cutting temperature	60 (10) - 130°C	60 (10) - 130°C
Tolerance	+/- 5°K	+/- 10°K
Operation	+/- 1°K	+/- 1°K
Max power	250 V	250 V
Max current	10 A	12 A
Contact resistance	< 20m Ω	< 20m Ω
Surround temperature	T 180°C	T 180°C
Certificate	Nemko-Certifikat No. 945010701	Nemko-certificat no. 982103601
Safety	EN 60730-2-9:1995	EN 60730-2-9:1995
Connection	Standard tab terminals or cables spot welded to the termianl pin

Benefits

Compact design
No extra cable connection is required
Premounted inside the element
Reliable function, power is cut close to the heating source
Low total cost for the function

Examples of application

Dish washers
Washing machines
Photographic processors
Boilers
Coffee machines
Air heating with forced air flow

PRODUCTS

COMPANY

HEATING

CONTROL

Mechanical Department

Tubular heating elements

Thermostat and manually resettable thermal cut-offs