INDUSTRY SECTORS WE SERVE TO

Immersion elements

The working temperature is regulated via an integrated thermostat/fuse.

For thermostat 70-150°C. For fuse 128°C, 152°C (the temperature of the components is validated based on the desired operating conditions).

Technical data

Material

Stainless steel EN 1.4301/SS 2333

Dimension

215x74x67 mm

Connection

Electrical connection 3x1.0 mm², 4 meter cable

Other

Other effect / voltage per customer spec.

Voltage

230 V

Hysteresis

11°C or per customer spec

Weight

1,4 kg - 3,1 kg

Assembly

No attachment device needed, attatched with integrated magnets at the bottom of the container.

Surface load

0,9W/cm²

Safety

CE marked per LVD. 2006/95/CE

Others

Heater complete with thermostat.

Should be at least 3 cm below surface during use. Not to be used with fluids that have a flame temperature below 190°C

Porcelain immersion elements
Porcelain immersion elements with a 150 mm inert section. Diameter 80/44 mm, supplied with a 2000 mm connection cable. Les mer >>
Glass immersion elements
Glass immersion element with a 150 mm inert section. Diameter 80/44 mm and 2000 mm connection cable. Les mer >>
Titanium immersion element
Titanium immersion element with a 150 mm inert section. Diameter 80/40 mm and 2000 mm connection cable. Les mer >>
Stainless steel immersion elements
Immersion elements in AISI 316L stainless steel with a 150 mm inert zone. Diameter 80/42.5 mm and 2000 mm connection cable. Les mer >>
Steel immersion elements
Tubular element in steel with a 150 mm inert section, diameter 80/42,5 mm and 2000 mm connection cable. Les mer >>
Acid-proof steel immersion element with thermostat
Tubular element in AISI 316L stainless steel, 400 mm inert section, thermostat 30-90 °C. Les mer >>
Submersible oil heater
The working temperature is regulated via an integrated thermostat/fuse.
Les mer >>

PRODUCTS

COMPANY